Exclusive -Jack Skellington Coffee Time UV DTF Wrap - MTO0242

**THIS IS A PHYSICAL ITEM**

Cup Wraps are pre measured to fit a 16oz Libby Glass Can.

We ARE NOT responsible for user errors while applying the wrap incorrectly. Also, we are not responsible for washing the cup with our wraps incorrectly.

Refund Policy:

All Sales are FINAL! We can't offer you a refund or exchange on the wraps.

Recommendations:

1.)Hand Washing ONLY. The dishwasher is not a recommended method to clean and wash. Please no aggressive cleaners.
2.)Please insure to educate yourself on the proper steps to properly place a wrap. Step-by-step Instructions will be placed with your order.

Wrap Application Instructions:

We are not responsible for cup wraps not fitting. Please insure to measure your cup and the wrap(s) before placing the design on the surface of the cup. (Instructions will be placed with every order)

**Please note some adjustments may be needed, not all 16oz cups have the same exact measurements. Some cups' circumferences will differ by a couple millimeters. Our wraps are made: 9.75"x4.25". This measurement is a standard 16oz cup. Some designs are a full wrap around design, some design are not.

1.) Make sure your surface is clean or any hand oils, dirt and etc. Also make sure its dry. Please DO NOT use alcohol to clean the surface, this WILL ruin your wrap.
2.) Squeegee wrap Front to Back before use.
3.) You must make sure that the wrap isn't overlapping with itself. If it is, it WILL not go on correctly. Some wraps may need trimmed to your preference, some may not. Designs and preferences vary.
4.) Line the film up on your cup, making sure its straight.
Once you have the wrap straight, Start peeling the wrap off the clear film backing exposing some of the wrap
      ((Please note once the wrap hits the cup there is NO removing it. Its extremely sticky and 
       permeate.))
6.) SLOWLY start apply the wrap, please insure to take your time. Press down on the film and work your way around the whole cup, removing the clear backing film as you go. Use a squeegee or something flat like a credit card to insure air bubbles are removed as the wrap is being placed around your cup. RUB RUB RUB this helps get any air bubbles out. And again SLOWLY apply.&
7.) Once your wrap has been placed all the way around your cup, you have rubbed out all of the air bubbles using your squeegee or a flat surface please go ahead and remove the top clear film. That's your last step! You have successfully placed a UV DTF wrap on your Cup!

Follow us on Instagram:
@Taysgraphicstudio